Extreme Networks ExtremeSwitching VDX 6740, Hardware Installation Manual

Page: 22 / 135

FIGURE 10 Non-port-side view of the AC VDX 6740T
1. Fan #1
2. Fan #2
3. Fan #3
4. Fan #4
5. Fan #5
6. Power supply #1
7. Power supply #2
8. Captive screws
9. Airflow label
10. Plug retainer
11. Plug receptacle
12. Status LED
13. Ground lug
14. Captive screw
15. Status LED
16. Airflow label
17. Handle
FIGURE 11 Non-port-side view of the DC VDX 6740T
1. Power supply #1
2. Power supply #2
3. Captive screws
Extreme Networks inter-switch link trunks
In VCS mode, unless specifically disabled, inter-switch link (ISL) Extreme Networks trunking between adjacent devices is automatic. All
ports must be in the same port group and must be configured at the same speed. There is a limit of sixteen ports per trunk group. No
separate licensing is required. Refer to the illustrations below for the exact port groups. On the VDX 6740T, ports in groups 3 and 3A, as
well as port groups 4 and 4A, cannot be trunked together. However, these ports can be trunked on the VDX 6740 when the 40 GbE
QSFP ports are configured in breakout mode. VDX 6740T 1GbE ports cannot be trunked.
NOTE
If connections are made to 16 different switches, only eight ports will be trunk ports while the other eight ports will be normal
ISL ports.
For instructions on configuring breakout mode and Extreme Networks trunking, refer to the Extreme Network OS Management
Configuration Guide .
Hardware components
ExtremeSwitching VDX 6740 Hardware Installation Guide
22 9036108-00