Extreme Networks ExtremeSwitching 5520 Series Hardware Installation Manual Download Page 73

Page: 73 / 162

Installing Your Switch

Safety Considerations for Installing Switches

on page 74

What You Will Need for the Installation

on page 74

Attaching the Switch to a Rack or Cabinet

on page 75

Installing Optional Components

on page 78

Installing Internal AC Power Supplies

on page 79

Turn on the Switch

on page 80

Connecting Network Interface Cables

on page 81

Before you attempt to install or remove an Extreme Networks switch, read the precautions in

Safety

Considerations for Installing Switches

on page 74.

Extreme Networks switches fit into standard 19-inch equipment racks.

A four-post rack-mounting kit is provided with the switch. A two-post kit can be ordered separately.

The installation process includes the following tasks:

1. Prepare to install the switch.

See

What You Will Need for the Installation

on page 74.

2. Install the switch in the rack.

See

Attaching the Switch to a Rack or Cabinet

on page 75.

3. Install optional components: optical transceivers and cables.

See the instructions in

Installing Optional Components

on page 78.

4. If your switch does not come with an installed internal power supply, install one or two power

supplies.
See

Installing Internal AC Power Supplies

on page 79.

Note
Be aware of whether the power supply you are installing is AC-powered or a DC-powered.
The installation instructions are different depending upon what type of power is used.

5. Power up the switch.

See

Turn on the Switch

on page 80.

6. Connect network interface cables.

See

Connecting Network Interface Cables

on page 81.

ExtremeSwitching 5520 Series Hardware Installation Guide

Summary of Contents for ExtremeSwitching 5520 Series



































































































































































Search results

Summary of Contents for ExtremeSwitching 5520 Series

Reviews:

Related manuals for ExtremeSwitching 5520 Series

Brands by name

Popular brands

Extreme Networks ExtremeSwitching 5520 Series, Hardware Installation Manual

Search results

Summary of Contents for ExtremeSwitching 5520 Series

Reviews:

Related manuals for ExtremeSwitching 5520 Series

Brands by name

Popular brands