1 Using the MBO-ART02 shorter bracket end as a template, mark and drill four holes on the wall.
Figure 7: MBO-ART02 articulating mounting bracket template for wall attachment
holes
2 Attach the MBO-ART02 articulating mounting bracket to the access point using two M6 hex-head
screws.
3 Align the MBO-ART02 articulating mounting bracket holes against the wall attachment holes and
attach the bracket using four M6 hex-head screws.
Install the Access Point on a Flat Surface Using the WS-MBV-VMM Vehicle
Bracket (#32216)
To attach the WS-MBV-VMM Vehicle Bracket (#32216) on a flat surface, you can use either the M4 or M6
attachment screws. The bracket has four parts:
•
Flat plate with thumbscrews; the AP attach assembly plate
•
Stiffener plate #1; used with the AP attach assembly plate
Install the Access Point
ExtremeMobility AP460i/e Outdoor Access Points
18
