Extreme Networks ExtremeCloud Appliance E1120 User Manual Download Page 39

Page: 39 / 219

Positioning Heatmaps

ExtremeCloud Appliance Floor Plans view offers

Positioning

heat maps to illustrate optimal device

location and client foot traffic. The following Positioning maps are available:

•

Location Readiness. Predicted location quality.

•

Foot Traffic (Supported on AP39xx only).

Manage Location Tracking with AP76xx and AP8xxx using ExtremeLocation. For more information,
see

ExtremeLocation Profile Settings

on page 79.

To access the Positioning maps from the floor plan view:

1 Display an available floor plan.
2 From the right panel, click

Positioning

3 To activate a map, click the ball and drag to the right.

4 To show clients, select either

Show Associated Clients

Show Unassociated Clients

Note
If your Positioning Profile is configured to track only active clients, you will not be able to
see unassociated clients on the map.

Summary of Contents for ExtremeCloud Appliance E1120




























































































































































































































Search results

Summary of Contents for ExtremeCloud Appliance E1120

Reviews:

Related manuals for ExtremeCloud Appliance E1120

Brands by name

Popular brands

Extreme Networks ExtremeCloud Appliance E1120, User Manual

Search results

Summary of Contents for ExtremeCloud Appliance E1120

Reviews:

Related manuals for ExtremeCloud Appliance E1120

Brands by name

Popular brands