Managing Administrator Accounts
ExtremeCloud Appliance is shipped with a factory-set, default administrator account with full rights:
•
The user ID is
admin
.
•
The factory preset password for this account is
abc123
.
These values are case sensitive. During initial configuration of ExtremeCloud Appliance, the CLI
wizard prompts you to change the default Admin user ID and password.
To add administrator accounts:
1 Go to
Administration
>
Accounts
.
2 Click
Add
and configure the following parameters:
Username
User name for the administrator account.
Password
Password for the administrator account.
Confirm Password
Re-enter password for the administrator account.
Admin Role
Select the level of access privileges for the administrator account. Valid values are:
•
Full. Full administrative privileges.
•
Read-Only. Ability to log on and view administrative pages.
3 To edit account settings:
1 Select and existing account from the list.
2 Modify settings as necessary and click
Save
.
4 To delete an existing account:
1 Select and existing account from the list.
2 Click
Delete
.
Note
All administrator accounts
except
the default account can be deleted.
Managing RADIUS Servers for User Authentication
Configure a list of RADIUS servers to authenticate users of ExtremeCloud Appliance.
1 Go to
Administration
>
Accounts
>
RADIUS
.
2 Under
Authentication Order
, click
Add
to add a RADIUS server to the Authentication Order.
3 Under
RADIUS Servers
, click
Add
to add the properties of the RADIUS server.
4 Select the
IP Address
field to display a list of available RADIUS servers.
Select the RADIUS server row to add or delete a RADIUS server.
Related Links
on page 147
Administration
ExtremeCloud Appliance User Guide for version 4.36.03
205
