manualshive.com logo in svg

Extreme Networks ExtremeCloud Appliance E1120, User Manual

The Extreme Networks ExtremeCloud Appliance E1120 User Manual is a comprehensive guide to help you make the most of your networking appliance. Available for free download at manualshive.com, this manual provides detailed instructions, troubleshooting tips, and configuration guidance, ensuring a seamless user experience with this high-performance product.

Share
Download
background image

USB connector the device is connected to. If you connect more than one USB device

at a time, the system returns an error.

Note

Format flash devices as non-bootable. The ExtremeCloud Appliance may

experience difficulty rebooting when connected to a bootable formatted

flash device.

Tech Support

Generate a tech support file for troubleshooting. Select the file criteria: ExtremeCloud
Appliance, 

Wireless AP

, 

Log

, or 

All

. When you generate a file for the wireless AP, you have the

option to select 

No Stats

 included in the file.

1

Click 

Generate Tech Support File

.

The generated file appears in the list.

2

To download the file, select the file and click 

.

Availability

ExtremeCloud Appliance provides the availability feature to maintain service availability in the event of
an outage. The Availability Pair feature allows both AP and Client statistics to be available on both sides
of the High Availability configuration.

Go to 

Admin

 > 

System

 > 

Availability

 and configure the Availability Pair settings.

Availability

•

Standalone. The appliance 

does not

 have an availability partner in the event of a failover.

•

Paired. The appliance is paired with another appliance in the event of a failover.

When configuring an Availability Pair consider the following information:

•

ExtremeCloud Appliance directly balances capacity allocations across both appliances in an
Availability Pair. Adoption Capacity is additive. For example, to support a 600 AP Capacity, you can
purchase a 500 Device Capacity (30330) and a 100 Device Capacity (30329). The Availability pair
shares the installed capacity to the 600 limit. You can enter the entitlements on either system in the
pair. However, when purchasing capacity license SKUs, make sure that none of the license blocks
exceed the maximum adoption capacity for any individual system.

•

Availability pair can be configured only within the same ExtremeCloud Appliance models.

•

Enable and configure NTP: Network Time settings on each appliance of an Availability Pair must be
identical for the configuration update process to be successful.

•

Use the Network Health chart on the ExtremeCloud Appliance Dashboard to Monitor the Availability
Link Status and the Synchronization Status for an Availability Pair.

•

Switch configuration and statistics are synchronized between the primary and backup
ExtremeCloud Appliance.

The following status data is replicated on the partner node of an Availability Pair:

•

Client Records

•

Group Records

•

Registered Users and Devices

Administration

ExtremeCloud Appliance User Guide for version 4.36.03

195

Summary of Contents for ExtremeCloud Appliance E1120




























































































































































































































Reviews:

No comments

Related manuals for ExtremeCloud Appliance E1120

GE MDS 4710M Setup Manual preview
MDS 4710M
Brand: GE Pages: 6
3onedata IES615-2D Series Quick Installation Manual preview
IES615-2D Series
Brand: 3onedata Pages: 3
3One data 7212 User Manual preview
7212
Brand: 3One data Pages: 5
3onedata IEM615 Series Hardware User Manual preview
IEM615 Series
Brand: 3onedata Pages: 33
Data Translation DT300 Series Getting Started Manual preview
DT300 Series
Brand: Data Translation Pages: 98
Delta Electronics Ethernet Communication Module DVPEN01-SL Manual preview
Ethernet Communication Module DVPEN01-SL
Brand: Delta Electronics Pages: 54
ETC Power Control Processor Configuration Manual preview
Power Control Processor
Brand: ETC Pages: 64
Intel Core 2 Quad Q9400 Product Brief preview
Core 2 Quad Q9400
Brand: Intel Pages: 2
Ubiquiti AmpliFi AFi-G Quick Start Manual preview
AmpliFi AFi-G
Brand: Ubiquiti Pages: 20
AMG Systems AMG9240-C User Manual preview
AMG9240-C
Brand: AMG Systems Pages: 2
Supermicro Optane Persistent Memory 200 Series User Manual preview
Optane Persistent Memory 200 Series
Brand: Supermicro Pages: 54
Patton DiamondLink 3201 Quick Start Manual preview
DiamondLink 3201
Brand: Patton Pages: 12
Fastech Ezi-SERVOII EtherCAT TO User Manual preview
Ezi-SERVOII EtherCAT TO
Brand: Fastech Pages: 108
Global411 MS41p1 Quick Installation Manual preview
MS41p1
Brand: Global411 Pages: 15
Airlinkplus ASW224 User Manual preview
ASW224
Brand: Airlinkplus Pages: 20
Planet VC-820M Quick Installation Manual preview
VC-820M
Brand: Planet Pages: 2
Eaton 9479-ETG-CSL Instruction Manual preview
9479-ETG-CSL
Brand: Eaton Pages: 32
Juniper LN1000 - RELEASE NOTES 8-27-2010 User Manual preview
LN1000 - RELEASE NOTES 8-27-2010
Brand: Juniper Pages: 64

Brands by name

Popular brands

Load more brands