manualshive.com logo in svg

Extreme Networks Extreme Wireless, Site Preparation And Installation Manual, Page: 86 / 147

Share
Download
Extreme Networks Extreme Wireless Site Preparation And Installation Manual Download Page 86

Figure 81: WS-AO-DX13025 5 GHz Horizontal Radiation Pattern

WS-AO-DX13025N

This antenna is the WS-AO-DX13025 standard antenna with a Standard Polarity Type-N Plug Connector
on a 58 inch cable. For more information, see 

WS-AO-DX13025

 on page 81.

WS-AO-DX10055N

This dual-band MIMO antenna provides spatial diversity coverage of 2.4 GHz and 5 GHz WiFi. This
antenna uses a Standard Polarity Type-N Plug Connector on a 39 inch cable. For mounting instructions,
see 

Mounting Antenna Model WS-AO-DX10055N and Related Antenna Models

 on page 26.

For information about the indoor model of this antenna, see 

WS-AI-DX10055

 on page 130.

Note
The WS-AO-DX10055N and the WS-AI-DX10055 are the same antenna. The WS-AO-
DX10055N is intended for outdoor use. The WS-AI-DX10055 is intended for indoor use.

Antenna Specifications

ExtremeWireless™ External Antenna with Wave 2

86

Summary of Contents for Extreme Wireless




















































































































































Reviews:

No comments