•
Support for two MIMO 4x4 (up to four 802.11ac spatial streams).
•
Two single band radios for dual-band, concurrent operation, optimized for indoor antenna coverage:
•
5 GHz (Radio 1) in any of the following modes: IEEE802.11ac, a/b/g and/or n
•
2.4 GHz (Radio 2) in any of the following modes: IEEE802.11ac, a/b/g and/or n
•
Enclosed in a rectangular, compact case.
•
Can be mounted on walls and drop/suspended ceilings.
•
Provides 80 MHz Bandwidth at 2.4/5 GHz operation (Channel Bonding).
•
Power is provided through two Ethernet ports (LAN port). This is the preferred method of powering
the AP on ceiling and wall installations. The AP3935 can also be powered by an external DC power
supply by plugging the supply’s input jack into the DC-In port.
•
The ExtremeWireless 3935e offers eight connections for external antennas.
For a list of supported antennas for the AP3935, see
Figure 4: AP3935e Top View
Refer to the
ExtremeWireless AP3935i & AP3935e Installation Guide
for more information about AP
installation procedures.
ExtremeWireless AP3865e
The WS-AP3865e is designed to extend your wireless LAN around indoor locations. It operates fully
with the Extreme Networks wireless LAN, including support for Extreme Networks wireless VoWLAN,
branch office mode, availability and mobility features. This AP operates in 802.11ac and 802.11n mode
ExtremeWireless APs That Support External Antennas
ExtremeWireless™ External Antenna with Wave 2
19