Access Point Mounting Options and Accessory Usage
Mount the AP460C, AP460S6C, or AP460S12C horizontally or vertically on a pole using the built-in
brackets on the hardware, or on a solid flat surface using an accessory bracket, as described in the
following table:
Table 8: Mounting accessory usage
Mounting accessory part number
Wall install
Pole install
Notes
AH-ACC-STRP-MRN
No
Yes
Outdoor access point stainless
steel pole cable clamps for 3 in.
to 7 in. diameter pole (larger
poles)
AH-ACC-BKT-ASM
Yes
No
You will need to provide four
mounting screws and screw-in
anchors
Table 9: Power cable accessory information
Part number
Details
AH-ACC-PW-CBL-US
6 ft. 18 AWG universal power cord with United
States plug
AH-ACC-PW-CBL-UK
6 ft. universal power cord with United Kingdom
plug
AH-ACC-PW-CBL-EU
6 ft. universal power cord with European Union
plug
AH-ACC-PW-CBL-AU
6 ft. universal power cord with Australia plug
AH-ACC-PW-CBL-JP
6 ft. universal power cord with Japan plug
AH-ACC-PW-CBL-KR
6 ft. universal power cord with Korea plug
Related Topics
Access Point and Accessory Box Contents and Order Information
on page 15
Install the Access Point on a Vertical Pole or a Horizontal Pole
Install the access point on a vertical or horizontal pole using the built-in access point bracket.
Before You Begin
The following hardware is required for installing the access point on a vertical pole or a horizontal pole:
•
An access point (AP460C, or AP460S6C, or AP460S12C)
•
Two AH-ACC-STRP-MRN accessory, which is an outdoor access point stainless steel hose strap for 3
in. to 7 in. diameter poles
Tip
The best practice is to mount the access point to a pole with a minimum circumference of
3 in.
Install the Access Point
Access Point Mounting Options and Accessory Usage
ExtremeWireless™ AP460C, AP460S6C, and AP460S12C Access Points
17
