Extreme Networks Altitude 300-2, Getting Started Manual

Page: 28 / 62

28 Altitude 300-2™ Getting Started Guide
Hardware Installation
NOTE
The cover is designed to secure the Altitude 300-2
™
from casual tampering that
can affect service to the clients. With the case in place the unit can’t be
unlocked, the Ethernet connection can't be unplugged, the integrated antennas
(Altitude 300-2i
™
) can't be rotated and the external antenna connections
(Altitude 300-2d
™
) can't be undone.
To remove the plastic cover, gently pull the sides near the clips outwards while
pulling the cover off the box.
Painting the Plastic Cover
The plastic cover can be painted to match a decor with any paint that is suitable
for polycarbonate plastic. The plastic light pipe must be removed before
painting. The light pipe assembly can be gently popped off using a screwdriver
that is slipped into the small lips provided on the light pipe. After painting,
reinstall the light pipe by snapping it back in place.
NOTE
Painting the antennas is not recommended.
Ordering the Plastic Cover Kit
The plastic cover kit may be ordered from Extreme Networks. The kit includes
covers and antenna shrouds. Please consult the Extreme Networks product web
site, www.extremenetworks.com, for the latest product information. The plastic
cover kits offered include:
Product Number: 15922- five translucent covers and ten black antenna
shrouds
Product Number: 15923- five cool gray covers and ten black antenna shrouds
Product Number: 15924- five cream covers and ten black antenna shrouds