
Hardware Installation
Altitude 300-2™ Getting Started Guide
23
Figure 5: Mounting The Wireless Port On The Universal Mounting Bracket
To remove the wireless port from the universal mounting bracket first remove
the lock or cable tie. Push the box in the direction of the lock hasp while gently
lifting it away from the bracket.
The universal mounting bracket is part of the Altitude 300-2
™
kit. Spares may
also be ordered. The part number is 15921.
(1) Locate the three mounting
holes on the back of the box
(2) Insert the bracket
mounting studs into the
mounting holes
(3) Firmly slide the
box down on the studs
(4) The box is properly
installed when the lock
hasp holes are lined up
(5) Secure the box with a
padlock or cable tie
Summary of Contents for Altitude 300-2
