Install the Access Point on a 9/16 in. Wide Ceiling Using AH-ACC-BKT-
AX-IL Accessory
Learn how to install any indoor access point on a 9/16 in. wide interlude ceiling tile using the AH-ACC-
BKT-AX-IL accessory.
Before You Begin
The following hardware is required to install the access point on a 9/16 in. wide interlude ceiling:
•
An indoor access point
•
One AH-ACC-BKT-AX-IL accessory
About This Task
The AH-ACC-BKT-AX-IL accessory is used on 9/16 in. wide Armstrong interlude ceiling rails. The
interlude ceiling grid artwork is printed on the back of the accessory for your reference.
Procedure
1. Remove the ceiling tiles.
2. Place the accessory on the ceiling rail in such a way that the accessory metal hinges are about 1/8
th
of a turn from the sides of the ceiling rail.
3. Push up gently and rotate the accessory clockwise until the hinges hook over the edge of the rail
and the white tabs click in place.
Note
There are two white tabs in the back of the accessory that holds on to the ceiling rail in
place. Use your finger to push and unhook one side of the white tab if you want to remove
the accessory from the ceiling rail.
Indoor Mounting Accessory Installation
Install the Access Point on a 9/16 in. Wide Ceiling Using
AH-ACC-BKT-AX-IL Accessory
Wi-Fi 6 (802.11ax) Access Points
15
