OPTIONAL ACCESSORIES INSTRUCTIONS
5
WHEELED PROTECTIVE COVER
X7 Tectonic Range includes a wheeled protective cover bag for frame sizes 3x3m, 3x4.5m and 3x6m.
WHEELED MARQUEE MOVING INSTRUCTIONS
WHEELED MARQUEE - ATTACHING WHEELS
1. Ensure brakes are
engaged.
3. Hold marquee with 2 hands.
4. Disengage the brakes.
5. Open frame slightly. Never wheel a fully
collapsed marquee.
6. Grasp one leg and pull marquee in the
desired direction. Never push.
7. Engage the breaks and refer to the “Set Up
Instructions”.
2. Remove standard marquee protective
cover.
NEVER
wheel with the cover on.
3. Fasten the wing nuts on the left/right until
finger tight. Repeat until all wheels are fitted
to marquee legs.
2. Locate ‘dimples’ on foot plate. Position the
wheel on foot plate so the wing nuts line up
over the ‘dimples’
1. On a bench or on ground, lay the marquee
on its side and extend inner frame leg.
MOVING WHEELED PROTECTIVE
COVER
1. Ensure the protective cover is correctly secured over the Marquee.
2. Check area/path is clear of objects.
3. Hold the top and bottom handles of protective cover.
4. Lean the unit back until all weight is on wheels, then push gently.
