Extra 300/SC, Maintenance Manual

Page: 222 / 250

CHAPTER 77
PAGE 13
MAINTENANCE MANUAL EXTRA 300SC
PAGE DATE: 12. February 2019
77-41-02 Mounting Sheets
To carry the engine data converter (1, Figure 5) and two
modules (9, 13) mounting sheets (12, 14) are installed on
the right side of the fuselage just behind the firewall.
Removal/Installation
1 Remove main fuselage cover as per Chapter 53-00-03.
2 Remove the electronic data converter (1, Figure 5) and/or
the respective module (9, 13) as per following sections.
3 Remove the attachment bolts and shock mounts (4) or the
attachment bolts (10) and remove the mounting sheet.
4 Reverse procedure for installation.
77-41-03 Electronic Data Converter
Removal/Installation
1 Remove main fuselage cover as per Chapter 53-00-03.
2 Disconnect the electrical wiring (3) from the electronic data
converter (1, Figure 5).
3 Remove the upper left shock mount and attachment bolt (4)
and the attachment bolts (15) and remove the electronic data
converter (1).
4 Reverse procedure for installation.
77-41-04 Module
Removal/Installation
1 Remove main fuselage cover as per Chapter 53-00-03.
2 Disconnect the electrical wiring (3) and tubing (8) if
applicable from respective module (9 or 13, Figure 5).
3 Remove the attachment bolts (2 or 11) and remove the module.
4 Reverse procedure for installation.