Instruction Manual
ExTox Control Unit ET-1D Series
Page 2 of 17
Foreword
We thank you very much for your confidence in our products and us, the ExTox Gasmess-
Systeme GmbH.
The Control Unit ET-1D as well as all other ExTox-Products and services stand for our high
quality targets. Our business is the health protection of mankind, protection of the environ-
ment and installations. We are glad to take this responsibility. Our Quality Management
System therefore follows ISO 9001 and our Production Monitoring is to keep the European
Directives 94/9/EC („ATEX“). You profit of the high reliability due to modern sensor tech-
niques and consequent interpretation acc. to the requirements of the regulations and stan-
dards valid for industrial application.
The Control Unit of the ET-1D series is a compact and easily understandable system for sin-
gle transmitters. It is completely configurable at the control unit to be easily in line with the
different requirements and applications. By means of its interfaces it is easy to integrate
even in higher control and management systems. It could be used in combination with all
ExTox Transmitters ExSens (-I) and Sens (-I).
Please do not hesitate to contact anytime in case of questions or if you require information:
ExTox Gasmess-Systeme GmbH
Max-Planck-Straße 15 a
59423 Unna
Germany
Telefon: +49(0)2303 33 247 0
Fax: +49(0)2303 33 247 10
E-mail: [email protected]
Internet: www.ExTox.de
BA_ET-1_e_2011-12-16.doc, Rev.: 16.12.2011
Software Version ET-1D: REV61207
(Subject to technical changes)
