13
Relative mode (Model MP530 only)
Relative zero allows any reading to be stored as a reference value and all following
reading to be reference to that value. Practically all displaying readings can be set as
relative reference value including MAX/MIN feature readings. Press the button
momentarily to activate and to exit relative zero mode.
Manual or Auto-ranging
Press the
RANGE
button momentarily to select manual-ranging, and the meter will
remain in the selected range and the LCD annunciator
will turn off. Press the
button momentarily again to step through the ranges. Press and hold the button for
greater than 1 second to resume auto-ranging.
Note: Manual ranging feature is not available in Hz function.
Beep-Jack™ Input Warning
The meter beeps as well as displays “
InEr
” to warn the user against possible damage
to the meter due to improper connections to the
μ
A, mA, or A input jacks when other
function (such as the voltage function) is selected.
Set Beeper Off
Press the
Hz
button while turning the meter on to disable the Beeper feature.