MN47-EU-EN-V3.0–12/11
11
BATTERY INSTALLATION and LOW BATTERY INDICATION
WARNING
: To avoid electric shock, disconnect the test leads from any source of voltage before
removing the battery
cover
.
LOW BATTERY INDICATION
The
+
icon will appear in the display when the battery voltage becomes low. Replace the batteries
when this appears.
BATTERY REPLACEMENT
1. Disconnect the test leads from the meter.
2. Remove the Phillips head screws (2) which secure the rear battery compartment cover.
3. Remove the fuse/battery compartment cover to access the battery.
4. Replace the 9V battery, observing polarity.
5. Replace and secure the fuse/battery compartment cover .
You, as the end user, are legally bound (
Battery ordinance
) to return all used batteries
and accumulators;
disposal in the household garbage is prohibited!
You can hand over your used batteries / accumulators at collection points in your
community or wherever batteries / accumulators are sold!
Disposal:
Follow the valid legal stipulations in respect of the disposal of the device at the
end of its lifecycle
REPLACING THE FUSES
1.
Disconnect the test leads from the meter.
2.
Remove the Phillips head screws (2) which secure the rear battery compartment cover.
3.
Remove the fuse/battery compartment cover to access the fuses.
4.
Gently remove the fuse(s) and install new fuse(s) into the holder(s).
5.
Always use fuses of the proper size and value (0.5A/250V fast blow for the 400mA range,
10A/250V fast blow for the 10A range).
6.
Replace and secure the fuse/battery compartment cover .