MM750W-en-GB_v1.1 12/18
18
FCC COMPLIANCE
A wireless module must be installed in the meter before the module can communicate
with iOS®/Android™
phones and tablets via Bluetooth® using the
ExView® W
application.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
IC: 1590A-MM750W
FCC ID: IWK-MM750W
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
WARNING
Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
Maintenance
WARNING
: To avoid electric shock, disconnect the test leads from any source of
voltage before removing the back cover or the battery or fuse covers.
WARNING:
To avoid electric shock, do not operate your meter until the battery and
fuse covers are in place and fastened securely.
We designed this meter to provide years of dependable service, please follow these
instructions carefully:
1.
KEEP THE METER DRY
. If it gets wet, allow it to fully dry before use.
2.
USE AND STORE THE METER IN NORMAL TEMPERATURES.
Temperature extremes
can shorten the life of the electronic parts and distort or melt plastic parts.
3.
HANDLE THE METER GENTLY AND CAREFULLY.
Dropping it can damage the
electronic parts or the case.
4.
KEEP THE METER CLEAN.
Wipe the case occasionally with a damp cloth. Do not use
abrasives, chemicals, cleaning solvents, or detergents.