manualshive.com logo in svg

Extech Instruments 42530, User Manual, Page: 1 / 4

Share
Download
Extech Instruments 42530 User Manual Download Page 1

User’s Manual 

 

 

 
 
 
 
 
 

High Temperature InfraRed Thermometer 

with Laser Pointer 

 
 
 
 

MODEL 42530 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Introduction 

 

Congratulations on your purchase of the Model 42530 IR Thermometer. This thermometer 
makes non-contact (infrared) temperature measurements at the touch of a button. The 
built-in laser pointer increases target accuracy while the backlit LCD and handy push-
buttons combine for convenient, ergonomic operation. Proper use and care of this meter 
will provide years of reliable service. 

Summary of Contents for 42530

Page 1: ...e Model 42530 IR Thermometer This thermometer makes non contact infrared temperature measurements at the touch of a button The built in laser pointer increases target accuracy while the backlit LCD and handy push buttons combine for convenient ergonomic operation Proper use and care of this meter will provide years of reliable service ...

Page 2: ... not be liable for any direct indirect incidental or consequential damages Extech s total liability is limited to repair or replacement of the product The warranty set forth above is inclusive and no other warranty whether written or oral is expressed or implied Safety Use extreme caution when the laser pointer beam is on Do not point the beam toward anyone s eye or allow the beam to strike the ey...

Page 3: ...d Laser button to turn on the laser pointer When the laser is on the laser icon will appear on the LCD over the temperature Aim the red beam approximately a half inch above the point of test pressing the Laser button again turns the laser off b Select the temperature units o C or o F using the blue o C and o F buttons c Push the yellow Backlight key to turn on the LCD backlighting function 5 Relea...

Page 4: ...s 6 The meter compensates for deviations in ambient temperature It can however take up to 30 minutes for the meter to adjust to extremely wide ambient temperature changes 7 To find a hot spot aim the meter outside the area of interest then scan across in an up and down motion until the hot spot is located Battery Replacement When the low battery symbol appears on the LCD replace the meter s 9V bat...

Reviews:

No comments