Extech Instruments 380340 User Manual Download Page 9

V5.0   5/06 

 

Support line (781) 890-7440 

Technical support: Extension 200; E-mail: [email protected] 

Repair & Returns: Extension 210; E-mail: [email protected] 

Product specifications subject to change without notice 

For the latest version of this User’s Guide, Software updates, and other 

up-to-the-minute product information, visit our website: www.extech.com 

Extech Instruments Corporation, 285 Bear Hill Rd., Waltham, MA 02451 

Warranty 

EXTECH INSTRUMENTS CORPORATION warrants this instrument to be free of defects 
in parts and workmanship for one year from date of shipment (a six month limited warranty 
applies to sensors and cables). If it should become necessary to return the instrument for 
service during or beyond the warranty period, contact the Customer Service Department at 
(781) 890-7440 ext. 210 for authorization or visit our website www.extech.com for contact 
information. A Return Authorization (RA) number must be issued before any product is 
returned to Extech. The sender is responsible for shipping charges, freight, insurance and 
proper packaging to prevent damage in transit. This warranty does not apply to defects 
resulting from action of the user such as misuse, improper wiring, operation outside of 
specification, improper maintenance or repair, or unauthorized modification. Extech 
specifically disclaims any implied warranties or merchantability or fitness for a specific 
purpose and will not be liable for any direct, indirect, incidental or consequential damages. 
Extech's total liability is limited to repair or replacement of the product. The warranty set 
forth above is inclusive and no other warranty, whether written or oral, is expressed or 
implied. 

 

 

Calibration and Repair Services 

Extech offers repair and calibration services

 for the products we sell. Extech also 

provides NIST certification for most products. Call the Customer Service Department for 
information on calibration services available for this product. Extech recommends that 
annual calibrations be performed to verify meter performance and accuracy. 
 

 

 

 
 
 
 
 
 
 
 
 
 

Copyright 

©

 2006 Extech Instruments Corporation 

All rights reserved including the right of reproduction in whole or in part in any form. 

 

Back to the 380340 Product Info Page

Visit us at www.T

estEquipmentDepot.com

Summary of Contents for 380340










Reviews: