The SolidFold 2.0 UTV bed cover
comes fully assembled.
Note any damaged or missing
components before installing.
It is important that all areas
where the bed cover mounts
are clean and free of debris
prior to installing.
UTV
Bed
Cover
Hinge Brackets
Tail
Clamp
Brackets
Mounting
Hardware
Item No. 31830030-30 7.18 DD
Extang, Corp., 2018. Printed in USA
3
1
8
3
0
0
3
0
-
3
0
Tailgate
Cab
#2
#3
Insert the hinge
bracket into the
2nd and 3rd bed
wall holes, facing
toward the cab
as shown.
Insert the tail
clamp bracket
into the last bed
wall hole, as shown.
Both sides.
Tighten the six
bracket nuts
with a 1/2”
socket,
each to
7 ft-lb
9 Nm.
Place the folded cover assembly
onto the front / cab end of the bed.
Note the positioning of
the mounting hardware
in the next step- 5.
The threaded bolt
included with the
cover assembly
should be inserted
into the forward
hinge bracket as
shown, one on
each side.
NOTE:
Spray a soapy
water solution
into the bed
holes and on the plugs.
Tools Needed:
Ratchet wrench
1/2” Socket
Soapy water
Applications:
2013 - 2018 Polaris Rangers
bed dimensions: 36.5” x 54” x 11.5”
Optional
Pop & Lock
lock mechanism.
Refer to the
supplemental sheet
for instructions
and use.
