PARTS INCLUDED IN YOUR KIT. You may want to lay them out in this manner for accessibility.
MISSING PARTS???
call Extang at
1-800-877-2588
Any and all needed parts will be shipped to you
directly.
(DO NOT return whole kit to store)
Visit us at:
www.extang.com
I t e m N o . 0 0 0 9 - 1 0 0 2 P r i n t e d i n U . S . A .
INSTALLATION SHEET-
GM/Chevy Composite Box
3
P L E A S E
D O N O T
L I T T E R
Depress the ClickLock
TM
release and remove one corner
from cab rail.
Feed tarp dowel into cab rail.
(
NOTE
: For easiest feeding action, place tarp on a flat
smooth surface, and keep dowel straight while feeding
into cab rail.
Caution, pavement may scuff tarp.
)
Reinsert corner piece into cab
rail until it “clicks” and locks
into place.
ClickLock
TM
1
2
NOTE:
B
LACK
M
AX
has snaps on all rails.
4
Tarp
Corner Pieces
For Classic Platinum Only
(This step does not apply to BlackMax)
Cab Rail
(BlackMax includes snaps on this rail)
Tailgate Rail
Side Rails
Spring Bows
(x3-Short Bed)
(x4-Long Bed)
Extang Corporation
1901 E. Ellsworth Rd.
Ann Arbor, MI 48108
734 677-0444, Fax: 734 677-8409
Note:
Tuff Tonno III and
Saber Tonno have
no snaps on rails
or tarp.
"L" Brackets and 2 1/4"
long Screws
(4 sets)
Secure a 2 1/4 "
screw into the "L"
bracket and use the
screw as a handle
to insert the disk of
the "L" bracket into
the keyhole slot
inside the truck stake
pocket (x4).
Wash
truck
bed.
Remove
paper tape
from all
rails.
Discard
properly.
Foam has NO
adhesive to touch
truck finish.
Pull up on the screw
to secure the "L"
bracket
FIRMLY
into
the keyhole slot and
then remove the
screw leaving the "L"
bracket in place.
Allen Wrench
