6
5
1
AUFBAU
Anleitung
Vers. 1.0 / 07.12.22
EX
-
46024
Switzerland:
EXSYS Vertriebs GmbH
Dübendorfstrasse 17
8602 Wangen
www.exsys.ch
Germany:
EXSYS Vertriebs GmbH
Industriestrasse 8
61449 Steinbach
www.exsys.de
DRIVER INSTALLATION
Windows XP / Vista / 7 / 8.x / 10 / 11 / Server 20xx
After the hardware installation is completed, the operating system automatically detects the EX
-
46024 and shows you a new
„
Serial PCI
-
Port
“
. Now insert the driver CD into your CD
-
ROM
drive (e.g. drive D:) and open the folder
„
SERIAL&PARALLEL/Ax99100
“
.
Now select the
folder of your operating system and start the application
„
AX99100_Setup
“
which is located in
the respective folder
(see picture). Follow the installation instructions and complete the installa-
tion.
Important!
Restart your PC after the installation.
CHECK INSTALLED DRIVER
Open the
>Device
-
Manager<
. Now you should see at
„
Ports (COM & LPT)
“
and at
„
Mutlifunction adapter
“
the following new Entries:
If you see these or similar entries, the card is installed correctly.
HARDWARE
INSTALLATION
Please note the following installation instructions. Because there are large differences between the
PC
’
s, we can give you only a general installation instructions for the EX
-
46024. Please refer your
computer
’
s reference manual whenever in doubt.
1.
Turn off the power to your computer and any other connected peripherals.
2.
Remove the mounting screws located at the rear and/or sides panels of your Computer and
gently slide the cover off.
3.
Locate an available PCI
-
Express expansion slot and insert the card. Make sure that the card
is plugged in correctly.
4.
Then attach the card with a screw to the rear panel of the computer.
5.
Gently replace your computer
’
s cover and the mounting screws.
6.
Finally, connect the included octopus cable to the 44
-
pin connector of the EX
-
46024.
DRIVER INSTALLATION
Linux
After the hardware installation is completed, the operating system automatically recognizes the
EX
-
46024. Now insert the driver CD into your CD
-
ROM drive (e.g. drive D:) and open the folder
„
SERIAL&PARALLEL/Ax99100
“
. The drivers for your Linux system are located in the
„
linux
“
folder (see picture).
Important!
Restart your PC after the installation.
BESCHREIBUNG & TECHNISCHE DATEN
Kompatibilität:
PCI
-
Express x1 bis x16
Betriebssysteme:
Windows XP
/
Vista / 7 / 8.x / 10 / 11 / Server 20xx / Linux
Anschlüsse:
4x 9
-
Pin D
-
Sub Seriell Stecker
Lieferumfang:
EX
-
46024, Oktopus Kabel, Low Profile Bügel, Treiber CD,
Anleitung
Zertifikate:
4x 9
-
Pin D
-
Sub Seriell Stecker
Die EX
-
46024 ist eine seriell RS
-
232 PCI
-
Express Karte. Sie ist mit vier seriellen FIFO 16C550
Anschlüsse für den Anschluss von High
-
Speed seriellen RS
-
232 Peripherie Geräten (z.B.
Modem, Plotter, Drucker, Scanner usw.) ausgestattet. Diese werden mittels eines Oktopus
Kabels zur Verfügung gestellt, welches an die 44
-
Pin Buchse der EX
-
46024 angeschlossen
wird. Die EX
-
46024 unterstützt alle PCI
-
Express Slots von x1 bis x16. Der serielle PCI
-
Express
Bus unterstützt optimal die Leistung des schnellen Asix Chipsatz. Die Karte gewährleistet so
eine sichere Datenübertragung und exzellente Performance von bis zu 115KBaud/s für jedes
angeschlossene serielle Gerät! Es ist nicht möglich die I/O Adressen und Interrupts manuell
einzustellen, da die Einstellungen der Karte vom System (BIOS) und beim installieren des
Betriebssystems automatisch vorgenommen werden.
ANSCHLÜSSE
9
-
Pin D
-
Sub Seriell Stecker:
9
-
Pin D
-
Sub Seriell Stecker
Pin
Signal
Pin
Signal
Pin
Signal
1
CDC
4
DTR
7
RTS
2
RXD
5
GROUND
8
CTS
3
TXD
6
DSR
9
RI
