13
7.3.2.
Using the knock down tips
This chapter only applies to 10061540 and 10061541.
It may occur that the dent has inverted outwards after using the dent removal tabs. Using the knock
down tips, the inverted dent can be knocked down to flatten the body panel.
1. Insert a knock down tip [#] into the knock down pen [#].
Use the rounded knock down tips to knock down smooth dents.
Use the pointed knock down tips to knock down sharp dents.
2. Place the knock down tip onto the inverted dent.
3. Tap the knock down tip [#] with the hammer [#] to flatten the inverted dent.
7.4.
Switching off
1. Unplug the power cable [#] from the power outlet.
The glue gun [#] is now switched off.
Allow the glue gun [#] to cool down completely.
8. Maintenance
8.1.
Cleaning the product
•
Electrical shock hazard. Never perform any maintenance with the power cable connected to
a power outlet. Always disconnect the power cable from the power outlet before cleaning
the product.
It is recommend to clean the product once a year.
1. Unplug the power cable [#] from the power outlet.
Allow the glue gun [#] to cool down for at least # minutes.
2. Clean the dent removal tabs [#] and glue gun [#] with rubbing alcohol and a scraper [#] or
cloth.