Expolite FesnelLED WW Large, User Manual

Page: 18 / 22

Setting DMX-Address
The DMX start address of the fixture is set in the menu ADDRESS . This is retained even when
changing the personality.
MENU
Setting DMX-Personality
MENU
The personality is set in the menu SETTING , submenu PERSONALITY . There are three different
modes which can be choosen: UNO (1 channel), DOS (2 channels), STD.P (5 channels).
Editing Static Scene
A static scene for stand-alone operation can be set in STATIC . These are mixed using DIMMER and
ZOOM.
MENU
E-18
PERSON
HSIC ADDRESS D.(001 - 512)
PERSON
SETTING HSIC PERSONALITY UNO
DOS
STD.P
PERSON
STATIC HSIC DIMMER
ZOOM 0 - 100
0 - 100
Choosing Run Mode
The operating mode is set in menu RUN MODE . For operation on a DMX-controller DMX needs to be
set. SLAVE sets the fixture into slave mode.
MENU
PERSON RUN HSIC DMX
HSIC SLAVE
PERSON RUN MODE HSIC DMX 512
HSIC DMX
HSIC SENS
HSIC DMMR
Power Mode
MENU
PERSON POWER MODE HSIC 575W
HSIC 750W
In the menu POWER MODE the user can choose whether the fixture is run with the power
comparable to a 575W or 750W halogen lamp.