48
13 SAFETY
The X2 Wave Flamer features multiple safety features, meant to protect the device, and allow the user
to make certain preparations to prevent damages to persons and objects. Furthermore, the user can
prevent risks by adhering to the guidelines mentioned in this manual. Under any circumstances, you
should adhere to the safety notes below
13.1 ANGLE BLOCKERS
In teh year 2018, optionally available angle blockers (mechanical) have been developed, which feature
another fail safe next to the software block, giving a 100% guaranteed possibilty to prevent certain
angles being driven to. These angle blockers are available anytime as a retrofit.
The angle block is mounted to either side of the swivel head. A sturdy metal pin can be moved freely
to every angle. The X2 Wave Flamer automatically detects the position of the block, and will save it in
its software. It is still recommended however, to still manually enter the preferred angles beforehand in
the devices menu.
To use the angle blockers, the firmware version 1.56 (or
higher) must be installed. If used in conjunction with older
firmware, it may lead to damages of the device.
The preferred angles should already be locked before fitting
the angle blockers to the device.
After switching the device on, the position of the metal pin
may not be altered, since the device won't note the new
position of the block, which will lead to possible damages of
the device.