29
10 AUTOMATIC CONTROL VIA RADIO (AUTOSHOW)
In a fully automated show (AutoShow) you can use the predefined ignitions according to the list of
sequences (see
Attachment 1 - List of sequences
). Further there is a possibilty to change the
opening times of single ignitions and sequences.
Programming an automated show can be done either in the free software
AutoShow
or the separately
sold software
ShowCreator X2
. We generally recommend the use of the Showcreator, since it shows
you an overview of your music, and allows for perfectly timed ignitions, as well as a simulation of the
Wave Flamer effects, and a calculation of the approximate fluid usage.
10.1 PREPARING THE AUTOMATIC IGNITION MODE (AUTOSHOW )
In order for the X2 Wave Flamer to be able to receive igniion signals via radio control, the DMX mode
must be deactivated. After switching teh DMX mode off, a restart of the system is neccessary.
10.2 PREPARING THE SHOW CREATOR SOFTWARE
10.2.1 BOX NUMBER SETTINGS
To activate the simulation of the Wave Flamer and show the fuel consumption, the box numbers of the
X2 Wave Flamer must be designated correctly.
Open the menu item
Extras
>
Settings
>
Box settings
, and set the number of ignition channels of
the X2 Wave Flamer to
Liquid
.
Menü
Edit DMX settings
M-DMX: Modus
OFF
