152
MB1 User Manual
© 2016 Expert Electronics
TRANSCEIVER OPERATIONS
BALANCE B - VFO B volume balance control between left and right channels.
·
RX1 - Enable RX1 volume and balance controls.
Press the RX1 to enable volume and balance control for VFO A, VFO B of the RX1.
·
RX2 - Enable RX2 volume and balance controls.
Press the RX2 to enable volume and balance control for VFO A, VFO B of the RX2.
·
VOLUME A - VFO A volume control.
Set the required volume for the VFO A receiver.
·
BALANCE A - VFO A volume balance control between left and right channels.
Set the required volume balance control between left and right VFO A channels.
·
VOLUME B - VFO B volume control.
Set the required volume for the VFO B receiver.
·
BALANCE B - VFO B volume balance control between left and right channels.
Set the required volume balance control between left and right VFO B channels.
·
SDR SOUND - Audio output from the transceiver.
Press the SDR SOUND to listen to the transceiver's received signals.
·
PC SOUND - Audio output from the PC.
Press the PC SOUND to listen to the audio from PC, e.g. audio, video files, web browsing,
SKYPE etc.
·
SPEAKER - Audio output to the speaker.
Press the SPEAKER to listen to the audio via the speaker.
7.8
Selecting the Operating Band
Select the operating band by pressing the band but t ons on the front panel of the transceiver.
You can use the following band buttons: 160, 80, 40, 30, 20, 17, 15, 12, 10, 6, 2 Met ers.
Press the button of the required band to switch to it.
Note:
(
Band buttons have 3 position memory. Successive presses of the band button cycles through
memory position (more details in
).
153
