54
ColibriDDC User Manual
© 2022 Expert Electronics
ExpertSDR2 SOFTWARE DESCRIPTION
Use I F as RI T - tuning by IF when the RIT offset is on.
VFO B - enable sub-receiver.
Key Led - enable backlit keypad.
Encoder Led - enable backlit encoder.
RX1/RX2 menu - switching between RX1 and RX2 receivers, or assign an exact E-Coder
panel to your receiver.
Volume - set the volume change step, per knob's clack.
SQL - set the squelch threshold change step, per knob's clack.
Filt er High - set the filter's high limit change step, per knob's clack.
Filt er Low - set the filter's low limit change step, per knob's clack.
Filt er Widt h - set the filter's width change step, per knob's clack.
Filt er Shif t - set the filter's shift change step, per knob's clack.
RF G ain - set the RF gain step, per knob's clack.
There are three LEDs on the E-Coder panel, from left to right:
1) Lights
green
when the VFO B is active
2) Lights
red
when on TX
3) Lights
orange
when the RX2 is active
3.3.6
Features menu
In the Feat ures menu you can set other programs to be launched along with the ExpertSDR2.
Enable checkbox - Enable autorun.
Set the Enable checkbox in front of the corresponding program in the list.
Summary of Contents for ColibriDDC
Page 2: ......
