background image

 

- 4 - 

Please  note:  Only  use  the  transformer  supplied.  Use  of  a  different 
transformer may result in damage to the product and void the warranty. 
For warranty information please see separate warranty card supplied. 

 
Cleaning and Maintenance 
 
The unit should be cleaned with a damp soft cloth. A non abrasive cleaning agent 
may be used for stubborn stains. Ensure no liquid enters the base of the unit. 
 
The unit has been designed for use by people with special needs, however this 
does  NOT  mean  it  is  unbreakable.  You  must  ensure  the  unit  is  not  hit  with 
anything and that no one pulls or pushes the unit. 
 
Changing Bubble Wall Water 
 
All bubble walls require the water in them changed every 4 

– 6 weeks to slow the 

build up of any bacteria.  
 
You  will  need  a  clean  bucket  and  the  transfer  pump  mentioned  in  the  Getting 
Started section. Experia recommend you use a 5 litre bucket minimum. 
 
Emptying 
 

1.  Remove the white plastic cover at the bottom of the tank to reveal a valve. 
2.  Using the pipe with a plastic male end on one end. 
3.  Clip  the  male  end  into  the  valve  and  dip  the  other  end  of  the pipe  into  a 

clean empty bucket. 

4.  The water should flow out of the bubble wall on its own. 
5.  Once the water has finished emptying from the tank, empty the bucket in a 

suitable place. 
 

Filling 

1.  Remove the white plastic cover at the bottom of the tank to reveal a valve 
2.  With the pipes attached to the Foot Pump, connect the male end into the 

valve 

3.  Dip the end of the other pipe into a bucket of clean water 
4.  Slowly  start  stepping  on  and  off  the  foot  pump  to  start  filling  the  Bubble 

Wall tank 

5.  When the water starts entering the tank slow the stepping action down so 

the pr

essure of the water entering the tank isn’t too great  

6.  Fill the tank until approximately ¾ full 

 

DO  NOT  FILL  THE  TANK

!  Once  the  Bubble  Wall  is  switched  on  the  air 

displacement caused by the internal pump to create the bubbles will cause 
the  water  level  to  rise.  If  the  Bubble Wall  tank  is  filled  above  ¾  full  then 
water may leak from the top of the tank and cause internal damage 

Summary of Contents for Calming LED Bubble Wall






Reviews: