exone 131091, Concise User Manual

Page: 9 / 144

5
Engl
ish
System Startup
1. Remove all packing materials.
2. Place the computer on a stable surface.
3. Insert the battery and make sure it is locked in position.
4. Securely attach any peripherals you want to use with the
computer (e.g. keyboard and mouse) to their ports.
5. When first setting up the computer use the following
procedure
(as to safeguard the computer during shipping, the
battery will be locked to not power the system until first
connected to the AC/DC adapter and initially set up as below):
• Attach the AC/DC adapter cord to the DC-In jack on the rear
of the computer, then plug the AC power cord into an outlet,
and connect the AC power cord to the AC/DC adapter. The
battery will now be unlocked.
6. Use one hand to raise the lid to a comfortable viewing angle (do
not exceed 130 degrees); use the other hand (as illustrated in
Figure 1
) to support the base of the computer ( Note: Never lift
the computer by the lid).
7. Press the power button to turn the computer “on”.
System Software
Your computer may already come with system software
pre-installed. Where this is not the case, or where you are
re-configuring your computer for a different system, you
will find this manual refers to
Microsoft Windows 10
.
Figure 1
- Opening the Lid/Computer with AC/
DC Adapter Plugged-In

Shut Down
Note that you should always shut your
computer down by choosing the
Shut
down command in
Windows
(see be-
low). This will help prevent hard disk or
system problems.
1. Click the Start Menu icon .
2. Click the Power item .
3. Choose Shut down from the menu.
130 °
NK 50S5SZ.book Page 5 Tuesday, June 9, 2020 3:08 PM