exone 131091, Concise User Manual

Page: 23 / 144

19
Engl
ish
Display Devices
Note that you can use external displays connected to the
HDMI-Out port and/or external monitor (VGA) port. See
your display device manual to see which formats are sup-
ported.
Configuring the Displays in Windows
All external and internal displays (up to 3 active displays)
can be configured from
Windows
by using the Display or
System (in Settings ) control panel or the Project menu.
To configure the displays using the Project menu:
1. Attach your external display(s) to the
appropriate port, and turn it(them) on.
2. Press the + P (or Fn + F7 ) key
combination.
3. Click on any one of the options from
the menu to select PC screen only ,
Duplicate , Extend or Second
screen only .
4. You can also click Connect to a
wireless display at the bottom of the
Project screen and follow the steps to
connect to any wireless enabled
display.
To configure the displays using the Display control panel:
1. Attach your external display(s) to the appropriate port, and turn
it(them) on.
2. Right-click the desktop and select Display settings from the
menu.
3. Click the Detect button.
4. The computer will then detect any attached displays.
5. You can configure up to 3 displays from the
Multiple displays
menu.
Figure 14
Project
Figure 15
Display
(Multiple
displays)
NK 50S5SZ.book Page 19 Tuesday, June 9, 2020 3:08 PM