HEATWAVE
Heated back support/belt
The Heat Inside
®
The Heat Inside
®
www.exo2.co.uk
TROUBLESHOOTING
What happens if my HeatWave belt doesn’t get warm?
Firstly, check that you have the HeatWave belt connected
to a power source.
Ensure the portable power pack is charged. This can be
done by firstly plugging the power pack into the associated
charger. If the red light on the charger comes on and stays
on, the power pack needs to be charged. If the power pack
is charged, check that the belt plug is correctly attached to
the powerpack.
Should you have any questions about your heated products,
please contact:
Customer Services Dept
EXO2
Caledonian House
Phoenix Crescent
Strathclyde Business Park
Bellshill ML4 3NJ
Tel: +44 (0)1698 746347
Email: [email protected]
SAFETY FEATURES
The FabRoc
®
heating system has been designed for safe
and reliable use. It has been tested to comply with
European safety regulations and the power system has been
CE marked. Safety devices are included to ensure the unit
is rendered safe, even under fault conditions.
DO NOT replace or interfere with the electrical components
in your belt or the power pack and charger unit.
The HeatWave belt, including portable power pack, is not
designed to be used under water. In addition, the portable
power pack must not, under any circumstances, be
immersed in water as this can cause electrical faults.
CLEANING INSTRUCTIONS
Remove power pack
Hand wash in warm water
Use non-biological soap powder
Rinse thoroughly
DO NOT TUMBLE DRY OR DRY CLEAN
WARRANTY
Every EXO2
garment is supplied with a one-year warranty
covering all electronic and mechanical failures. In the
unlikely event that any part should fail within the first year,
return it to us and we will repair or replace it free of charge.
Note: the warranty does not cover intentional alterations,
accidental damage or improper cleaning.
The Heat Inside
®
The Heat Inside
®
