
Form No. 4502-859 Rev A
Installation Instructions
Trash Kit
Lazer
®
Kit No. 126-7379
WARNING
CALIFORNIA
Proposition 65 Warning
This product contains a chemical or chemicals known to the State of California to
cause cancer, birth defects, or reproductive harm.
Safety Alert Symbol
This Safety Alert Symbol (
) is used both in this
instruction sheet and on the machine to identify important
safety messages which must be followed to avoid accidents
This symbol means:
ATTENTION! BECOME ALERT!
YOUR SAFETY IS INVOLVED!
Figure 1
Safety Alert Symbol
The safety alert symbol appears above information which
alerts you to unsafe actions or situations and will be followed
by the word
DANGER
,
WARNING
, or
CAUTION
.
DANGER
: Indicates an imminently hazardous situation
which, if not avoided,
Will
result in death or serious injury.
WARNING
: Indicates a potentially hazardous situation
which, if not avoided,
Could
result in death or serious injury.
CAUTION
: Indicates a potentially hazardous situation
which, if not avoided,
May
result in minor or moderate injury.
This manual uses two other words to highlight information.
Important
calls attention to special mechanical information
and
Note
emphasizes general information worthy of special
attention.
WARNING
If you leave the wire on the spark plug, someone
could accidentally start the engine. Accidental
starting of the engine could seriously injure you or
other bystanders.
Disconnect the wire from the spark plug before you
do any maintenance. Set the wire aside so that it
does not accidentally contact the spark plug.
Note:
Determine the left and right sides of the machine
from the normal operating position.
Note:
Park the unit on a level surface. Make sure all
moving parts have stopped and the spark plug wire has
been disconnected. Allow unit to cool before starting these
instructions.
Important:
Multiple accessories added to a base unit
can change the stability of the machine. Read the
unit operator’s manual to determine if counterbalance
weights are necessary for the accessories installed on
the unit.
© 2016—Exmark Mfg. Co., Inc.
Industrial Park Box 808
Beatrice, NE 68310
www.Exmark.com
Original Instructions (EN)
Printed in the USA
All Rights Reserved
*4502-859* A