Exinda EXNV-10063, Administration Manual

Page: 513 / 623

Exinda Network Orchestrator 4 Settings | 513
Creating an Edge Cache Policy in the Optimizer
Edge Cache works on outbound, HTTP based conversations (and HTTPS based conversations, for version 7.0.2 and later).
To enable Edge Cache, create a policy that will capture the HTTP application traffic that you wish to cache and add the
policy to the appropriate virtual circuit in the Optimizer. You can specify a subset of the network to use Edge Cache by
specifying the source network object.
CAUTION
You can create an Edge Cache policy on anything except a L7 signature. That is, you can set the policy filter using
VLAN, source and/or destination network objects, ToS/DSCP, or applications that are based on protocol, ports,
network objects, or DSCP.
NOTE
It is possible to shape traffic that is being cached on the first pass. However, there is one extra consideration. Traffic
hitting the Edge Cache engine is only shaped by the policy configured for the “Web” application-group or the
HTTP/HTTPS application objects. For example, if a flow being classified as “Software Updates” is falling under the
“Software Updates” policy, it is actually shaped as using the “Web” policy settings.
To learn more about configuring policies, see
Policy
in the main user guide.
To create an Edge Cache policy
1. Click Configuration > Optimizer > Policies > Create New Policy or click Create New Policy in the appropriate virtual
circuit.
2.
Type a name for the policy.
3. Select the Acceleration checkbox and select Edge Cache from the Acceleration list.
4.
Create the filter rules for the policy, ensuring that HTTP (or HTTPS) or an application based on protocol, port, network
object, or dscp is selected from the application list.
5. Click Add New Policy .
To apply Edge Cache to a subset of the network