Exhausto VEX5000 Series, Assembly, Installation And Maintenance Instructions, Page: 22 / 64

3005831-2019-04-01.fm
Mechanical assembly
22/64
3.8 Rotary heat exchanger
Installation of a split rotor requires further instructions, which are found in “Instructions
for split rotor VEX 5000”. The instructions are stored in the rotor section when a split
rotor is supplied.
3.8.1 Check
After transportation, handling and setting up of the air handling unit, check that the rotor
does not come into contact with the sides. The distance to the edge must be uniform on
both sides.
3.9 LonWorks
®
If the air handling unit is supplied with an EXcon control system, the LON
®
module can
be supplied as an accessory.
The LON
®
module can also be retrofitted as a LonWorks
®
kit.
EXHAUSTO provides a LonWorks
®
kit, which consists of a module and visit by a
technician, who will fit and configure the control system.
Contact EXHAUSTO for more information.