2. Installation of the VEX
2.1 Scope of installation
VEX unit
The electrical installation for the VEX unit comprises the following tasks:
Connection box
Wiring configurations for the terminal board in the connection box:
● Supply voltage for motor controls 1 and 2
● Supply voltage for rotor control
● Rotor control signals
● Motor control signal (MC) and alarm relay
For other technical data, see the “Technical data” section in the main instructions of
the VEX.
2.1.1 NB:
NB:
The door must be kept clear.
No cables or equipment of
any kind may be fitted to the
door
3005888-2018-05-31
Installation of the VEX
9/16
Summary of Contents for VEX270HX
Page 13: ...3005888 2018 05 31 13 16...
Page 14: ...3005888 2018 05 31 14 16...
Page 15: ...3005888 2018 05 31 15 16...
Page 16: ......