Exhausto VEX200 series, Mechanical Installation Instructions

Page: 18 / 32

3. Mechanical assembly
3.1 Installing the unit
Description The VEX unit is installed so that it is horizontal.
3.1.1 Installed directly onto the floor
The requirements for the floor surface must be met, see the section entitled "Re-
quirements for underlying surface", chapter 1.
NB After installation, check the VEX unit is completely level.
3.1.2 Installing on mounting base
The EXHAUSTO mounting base enables the air handling unit to be installed correct-
ly. The base is equipped with adjustable levelling screws, so that the air handling unit
can be fitted horizontally on a surface that is not level ( +/- 20 mm per metre). See
diagram no. 3002646 for installing on the mounting base.
Diagram showing
levelling screw po-
sitions
1492
804,5 754,5
1442
RD
12464-01
3005039-2018-01-08
Mechanical assembly
18/32