Exhausto EXcon, Original Instructions Manual

Page: 30 / 52

4.1.3 Heating
Service menu
Heating Description
HEATING
Show current operating status. Set functions and forced
fan control of heating coils.
Submenu Any comments
Show current operating status. Set temperature for
heating coil 1
● Current outdoor temperature [°C]
● Current heating [%]
● Set max supply air temp. [°C] *
● Current supply air temperature [°C]
● Set min supply air temp. [°C] *
Symbol is shown when an alarm from the heat inter-
face is triggered.
* Not shown for temperature regulation: Constant sup-
ply air
Show current operating status. Set temperature for
heating coil 2
● Current outdoor temperature [°C]
● Current heating [%]
● Set max supply air temp. [°C] *
● Current supply air temperature [°C]
● Set min supply air temp. [°C] *
Symbol is shown when an alarm from the heat inter-
face is triggered.
* Not shown for temperature regulation: Constant sup-
ply air
Electric heating coil
Shown for the electric
heating coil 1 Show current operating status. Set regulation for
current type of electric heating coil 1
● Current heating [%]
● Set regulation form:
● 0–10 V
● 1 step
● 2 step
● 3 step
● 4 step
● 5 step
● 7-step binary
● Overheating: Low/High
● Current signal at heat output [V]
● Current status Heating relay 1: Open/closed
● Current status Heating relay 2: Open/closed
3005858-2017-09-28
Service level
30/52