6. Alarms
6.1 Alarms and info (Menu 4)
NB
Alarms are shown in the event of unit faults or irregular operation
●
Check the Current list (Menu 4) for alarm messages and refer to the list of
alarms given at the end of these instructions.
List of alarms
Main menu
Settings >
Operating mode >
Operating readings >
Alarm and info >
Time and weekly plan >
Versions >
Safety functions >
Service >
Exit technician menu >
Save settings >
4 Alarm and info
Information
Alarm
Warning
Reset alarms >
Current list >
Alarm log list >
Delete alarm log >
Yes
No
No
No
No
4.5 Current list
Alarm 02
Alarm 01
2009-02-10
2009-02-10
Alarm 03
2009-02-10 18:22:50
Alarm 04
12012
2009-02-10 18:25:00
Alarm 05 13071
2009-02-10 19:00:00
01144
10:54:17
02144
11:01:12
03073
The active alarms can be seen in the current list of alarms in Menu 4.5.
6.2 Reset alarms
Alarm causes must
be found
An alarm can be reset once the cause has been remedied.
Menu 4
All alarms may be reset by selecting reset alarms in Menu 4
More than one alarm
If several alarms are active, they will all be reset simultaneously.
Alarms trigger again
If an alarm repeatedly triggers, contact a service technician.
6.3 Alarm display – causes of errors
Alarms shown in
display
In the event of unit alarms/warnings, one of the following icons on the right side of
the menu bar is shown – go to current list of alarms to see alarm.
Main menu
Operating mode >
Operating readings >
Main menu
Operating mode >
Operating readings >
Current list
4.5 Current list
Alarm 02
Alarm 01
2009-02-10
2009-02-10
Alarm 03
2009-02-10 18:22:50
Alarm 04
12012
2009-02-10 18:25:00
Alarm 05 13071
2009-02-10 19:00:00
01144
10:54:17
02144
11:01:12
03073
3004256-2014-09-10
Alarms
48/72
