EXFO T200S, User Manual, Page: 14 / 146

Safety Information
8
T200S
Laser Safety Information
Laser Safety Information
Your instrument is in compliance with standard IEC 60825-1: 2014.
Laser radiation may be encountered at the optical output port.
The following label indicates that the product contains a Class 1M source:
Pout max.: / Psortie max. : ≤ 50 mW
Complies with FDA performance standards for laser products except for conformance with
IEC 60825-1 Ed. 3., as described in Laser Notice No. 56, dated May 8, 2019.
I
MPORTANT
Other safety instructions relevant for your product are located throughout this
documentation, depending on the action to perform. Make sure to read them
carefully when they apply to your situation.
W
ARNING
Viewing the laser output with telescopic optical instruments (for example,
telescopes and binoculars) may pose an eye hazard and thus the user should not
direct the beam into an area where such instruments are likely to be used.
RAYONNEMENT LASER INVISIBLE
NE PAS OBSERVER DIRECTEMENT À L'AIDE D'INSTRUMENTS D'OPTIQUE
NE PAS EXPOSER LES UTILISATEURS DE DISPOSITIF OPTIQUE
TÉLESCOPIQUE
APPAREIL À LASER DE CLASSE 1M
INVISIBLE LASER RADIATION
DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS
DO NOT EXPOSE USERS OF TELESCOPIC OPTICS
CLASS 1M LASER PRODUCT