EXFO T200S, User Manual, Page: 126 / 146

SCPI Command Reference
120
T200S
T200S Specific Commands
[SOURce]:WAVelength:SWEep:SPEed?
Description
This query returns a value indicating either the current sweep
speed, or the minimum/maximum/default possible sweep speed.
At *RST, this value is set to MAXimum.
Syntax [:SOURce]:WAVelength:SWEep:SPEed?<wsp>
[MAXimum|MINimum|DEFault]
Parameter(s)
³
MAXimum
The query returns the maximum possible speed in meter per
second.
³
MINimum
The query returns the minimum possible speed in meter per
second.
³
DEFault
The query returns the default speed in meter per second.
Response Syntax
<speed>
Response(s)
speed:
Floating point number corresponding to the sweep speed in
meter per second or the minimum/maximum/default speed in
meter per second, depending on the specified query parameters.
Example(s)
SOUR:WAV:SWE:SPE 100E-009
SOUR:WAV:SWE:SPE? returns 1.000000E-009
See Also
[SOURce]:WAVelength:SWEep:SPEed
on page 119
[SOURce]:WAVelength:SWEep:SPEed:LIST? on page 121