EXFO T200S, User Manual, Page: 111 / 146

SCPI Command Reference
Tunable Laser Source
105
T200S Specific Commands
[SOURce]:FREQuency:SWEep:STOP?
Description
This query indicates either the current or the
minimum/maximum/default stop frequency of a swept signal.
At *RST, this value is set to MAXimum.
Syntax [:SOURce]:FREQuency:SWEep:STOP?<wsp>
[MAXimum|MINimum|DEFault]
Parameter(s)
³
MAXimum
The query returns the maximum possible stop frequency for
the laser model.
³
MINimum
The query returns the minimum possible stop frequency for
the laser model.
³
DEFault
The query returns the default stop frequency for the laser
model.
Response Syntax
<stop>
Response(s)
stop:
Floating point number in Hz corresponding to the current stop
frequency or the minimum/maximum/default stop frequency,
depending on the specified query parameters.
Example(s)
SOUR:FREQ:SWE:STOP 197.5 THZ
SOUR:FREQ:SWE:STOP? returns 1.014
See Also
[SOURce]:FREQuency[:CW|FIXed]
on page 98
[SOURce]:FREQuency:SWEep:STARt? on page 103
[SOURce]:FREQuency:SWEep:STOP on page 104
[SOURce]:WAVelength:SWEep:STOP?
on page 125