EXFO T100S-HP Series, Programming Manual

Page: 20 / 40

Remote Control Commands
20 T100S-HP Programming Guide
2.2 Optical Output Control
2.2.1 DISABLE
Syntax
DISABLE
Parameter None.
Description Disables the laser output.
Response • RS-232C:
OK
• GPIB: none, see section Checking System Status with the Status Byte, p. 9 .
2.2.2 ENABLE
Syntax
ENABLE
Parameter None.
Description Enables the laser output.
Response • RS-232C:
OK
• GPIB: none, see section Checking System Status with the Status Byte, p. 9 .
2.3 Output Power Settings
2.3.1 DBM
Syntax
DBM
Parameter None.
Description Sets dBm as the unit for optical power values.
Response • RS-232C:
OK
• GPIB: none, see section Checking System Status with the Status Byte, p. 9 .
2.3.2 MW
Syntax
MW
Parameter None.