EXFO Power Blazer 88200NGE, User Manual

Page: 573 / 887

Test Results
Power Blazer
563
Summary (iSAM)
Summary (iSAM)
From the
Test
menu, tap
Results
, and the
Summary
tab.

Start Time indicates the date and time the test was started. The date
and time is reset every time the test is restarted.

Configuration/Performance Results and RFC 6349 Results buttons
are used to respectively display summary results for
Service
Configuration Test and Service Performance Test , or RFC 6349 Test
when results don’t fit on one page.
Service Configuration Test and Service
Performance Test

The actual test status is displayed as follows:
Test Status Description
“--” Test has not started.
Disabled Test/subtests is/are disabled.
Running Test/subtest is currently running.
Data Transfer Test/subtest is running but no test traffic is being transmitted.
Completed , <Verdict> Test/subtest has completed with the test pass/fail verdict.
A fail verdict is declared when a Link Down or LOS is detected,
or when any SLA parameter fails.
Aborted , < reason > Test/subtest has been aborted either manually (Stop) or
automatically from an alarm and the reason why the test has
been aborted is also displayed as follows:
Link down alarm , LOS alarm , Timeout during execution ,
DTS connection failed , Loss of remote connection (DTS) ,
Unresolved addresses , Stopped, NAT detection failed ,
Missing DTS-NAT SW option