EXFO Power Blazer 88200NGE, User Manual

Page: 544 / 887

Test Results
534
88000 Series
Summary / Client Summary
EtherBERT, FC BERT, BERT (eCPRI, CPRI/OBSAI, and FlexE), and Unframed
BERT
on page 183). When Service Disruption is disabled, the message
Service disruption monitoring disabled is displayed.
Service Disruption is the time during which there is a disruption of service
due to the detection of defects.

Disruption Time
Note: For OTL defects, at the exception of LOL, the disruption time is displayed for
the lane having the longest disruption time. See
OTL-SDT
on page 499 for
results per lanes.
Longest (ms)
indicates the longest measured disruption time.
Shortest (ms) indicates the shortest measured disruption time.
Last (ms)
indicates the length of the last measured disruption time.
Average (ms) indicates the average duration of all measured
disruption times.
Total (ms) indicates the total duration of all measured disruption
times.

Defect , available with Transport test applications, indicates on which
layer and defect the service disruption time test is performed. For OTL
defect (parallel interface) also indicates within parenthesis the lane
number having the longest disruption time.

Disruption Count : Indicates the number of disruption events detected
since the beginning of the SDT test.
Note: When a disruption event is equal to or longer than the test period which is
fixed to 5 minutes, then the measured disruption time is equal to the test
period.