EXFO Power Blazer 88200NGE, User Manual

Page: 530 / 887

Test Results
520
88000 Series
SDT (Multi-Channel OTN)

Total (ms) indicates the total duration of all measured disruption
times.

Count indicates the number of disruption events detected since the
beginning of the test.

PASS FAIL , available when pass/fail verdict is enabled, indicates the
SDT pass/fail verdict.

Time Mode
selects the format used to display the disruption time.
Relative displays SDT events based on the time elapsed since the
beginning of the test.
Absolute (default) displays SDT events based on date and time.

Units
selects the unit used to display SDT statistics: μ s, ms (default), s,
or min.

Time Stamp
displays the time or date/time for each SDT channel; this
apply to Longest and Last disruption time statistics. Choices are None
(default),
Time
, and
Date/Time
. An extra line is added for each
channel to display the time, and two lines to display the time and date.
Note:
When a disruption event is equal to or longer than the test period which is
fixed to 5 minutes, then the measured disruption time is equal to the test
period.