EXFO Power Blazer 88200NGE, User Manual

Page: 435 / 887

Test Results
Power Blazer
425
Alarms/Errors Overview
Interface
Alarms

LOS
(Loss Of Signal)
RX : Absence of an input signal or an all-zeros pattern is received.
Available for each Optical Lane for parallel interfaces. Not supported
when
PHY Type is set to DAC .
For CPRI Framed L2:
For rates up to 9.8G: Absence of an input signal or at least 16
8B/10B code violations occur in one hyperframe.
For rate 10.1G: Absence of an input signal or the hi_ber variable is
set to true.
For Wander 1PPS interface: Either no pulse is received or no pulse is
received within 1 second ±100 ms after the previous pulse.

LOC Lane (Loss Of Clock Lane) is available for each Physical Lane for
parallel interfaces.
RX : The unit is unable to lock on the
Physical/CAUI/CAUI-4/XLAUI/200GAUI-4/400GAUI-8/16 link interface.

Frequency (available for each Physical Lane for parallel interfaces)
Not available when using an active copper SFP.
RX : The received signal frequency meets the standard specifications
(green) or not (red).
For Ethernet 100/1000M Electrical , 100M Optical , 1GE Optical ,
10GE LAN/WAN
,
25GE
, or Fibre Channel
1X
/
2X
/
4X
/
8X
/
10X/16X/32X
interface/rate, the frequency range is ± 100 ppm. Not supported for
10M electrical.