EXFO Power Blazer 88200NGE, User Manual

Page: 258 / 887

Test Setup - Test Configurator, Timer, and System
248
88000 Series
MAC/IP/UDP
Modify Frame Structure
Allows modifying the structure of the frame.

Global Option

S-OAM check box when selected enables EtherSAM over service
OAM at Layer 2 on all services. The EtherSAM uses LBM and LBR
messages of the S-OAM protocol to perform the test. A device
having the capability to loopback LBM messages (via LBR) is
required at the remote. Only available with EtherSAM for rates up
to 10G WAN. Not available in Dual Test Set and Dual Port topology.

Layer Mode sets the frame layer mode for all services (available
with EtherSAM for rates up to 10G WAN when the S-OAM check
box is cleared):
Mixed
(default) allows configuring the frame layer per service: L2,
L3, or L4.
L2 Only
configures all services to Layer 2 only (no IP, no MPLS).

Provider Encapsulation is available with single port EtherBERT
Framed Layer 2 and Traffic Gen & Mon test applications at rates of
10GE, 40GE, and 100GE. Not supported with Dual Test Set and
when
Layer Mode
is set to
L2 Only
. Choices are:
None : No encapsulation.
EoE
: Ethernet over Ethernet encapsulation.