EXFO Power Blazer 88200NGE, User Manual, Page: 256 / 887

Test Setup - Test Configurator, Timer, and System
246
88000 Series
Local Details (iSAM)

VLAN ID/Priority check box when selected, cleared by default,
enables C-VLAN with VLAN Ethernet type of 8100 and allows setting
both VLAN ID and priority.
VLAN ID
choices are
0
through
4095
; default is
2
; refer to
VLAN ID and
Priority on page 842 for more information.
Priority
choices are
0
(default) to
7
. Refer to
VLAN ID and Priority
on
page 842 for more information.
IP

IP Version is set to IPv4 .

Automatic IP (DHCP)
check box, when selected (cleared by default),
allows obtaining dynamically an IP address from a DHCP (Dynamic
Host Configuration Protocol) server.
Note: IP Address , Subnet Mask , and Default Gateway are not available when
the Automatic IP (DHCP) check box is selected.

IP Address allows entering the source IP address for the stream. The
default setting is 10.10.x.y, where x and y are respectively the two least
significant bytes of the port default MAC address.

Subnet Mask
allows entering the Subnet Mask for the stream. The
default setting is 255.255.0.0 .

Default Gateway
check box, when selected (cleared by default),
allows entering a default Gateway IP address. When the Default
Gateway
check box is selected, its default address is
0.0.0.0
.
Remote Discovery ID
Remote Discovery ID
is used to easily identify this module in case another
module is performing a discovery scan. Up to 16 alpha-numeric characters
are allowed.